朝日薫 / K.Sato
MultiX Zinnia Product : All Open Source Software / Hardware
MultiX Zinnia Product SDK [*AVR] for Arduino IDE
This software development kit is primarily for the new generation AVR family. (Announced after Microchip brand integration) Configured to aid development in the Arduino IDE. C/C++/Assembler programs written in AVR-GCC/AVR-LIBC It provides a workflow up to uploading to the target MCU using avrdude.
WARNING: Arduino compatible API is not provided.
- Please add the following link to your Arduino IDE preferences.
https://askn37.github.io/package_multix_zinnia_index.json - Then search for
multixin Boards Manager. - Select the desired architecture and install.
megaAVR/modernAVR/reduceAVR/UPDI4AVR - For more information (ja-JP)
OpenData
We publish downloadable data that anyone can use, modify, and redistribute freely.
Firmware “JTAG2UPDI” (Clone) : UPDI NVM Reader/Writer Firmware for Arduino Compatible
- JTAG2UPDI clone with support for NVMCTRL versions 0, 2, 3, and 5
- Installation board: Arduino UNO Rev.3, UNO Wifi Rev.2 etc.
- Target AVR: tinyAVR-0/1/2, megaAVR-0, AVR_DA/DB/DD/EA/EB
- For repository
Product “UPDI4AVR” : UPDI Programmer Writer with High-Voltage Activation
- UPDI programmer writer with HV activation. (66x31mm)
- It can also be reset without destroying the functionality of the target MCU’s UPDI pin.
- Compatible with all Microchip AVR DA/DB/DD/EA/EB, Atmel tinyAVR-0/1/2 and megaAVR-0 series.
- For more information (ja-JP) (en-US)
Product “Duino” : modernAVR Board with Battery Powered
- Battery powered board with modernAVR. (79x53mm)
- Adopts Microchip AVR DA/DB/DD or Atmel ATmega**08 series. (TQFP32)
- Equipped with Li-ion battery charger and protection circuit.
- The battery voltage can be boosted to 5V or left alone.
- Additional On-board calendar IC.
- Arduino compatible external pin layout.
- x1 Grove/M5 compatible I2C connector.
- For more information (ja-JP)
Product “TPI4AVR” : TPI Programmer Writer with High-Voltage Activation
- TPI programmer writer with HV activation. (66x32mm)
- Additional SOT-23 conversion sockets can be added and signals can be extracted.
- Compatible with Atmel ATTiny4/5/9/10, ATtiny20/40 and ATtiny102/104 series.
- For more information (ja-JP)
Product “UPDI Reset Plus” Snap-On Circuit
- Additional circuitry that allows the UPDI pin to be a RESET button. (16x12mm)
- It’s convenient because you don’t have to lose the functionality of the UPDI pin.
- For more information (ja-JP)
Copyright and Contact
Twitter: @askn37
BlueSky Social: @multix.jp
GitHub: https://github.com/askn37/
Product: https://askn37.github.io/
Copyright (c) askn (K.Sato) multix.jp
Released under the MIT license
https://opensource.org/licenses/mit-license.php
https://www.oshwa.org/